BACK

FMAG-S High-Frequency Slurry

 
Overview
  • The converter uses 25Hz-50Hz high frequency square wave excitation to effectively reduce the flow noise;
  • Use the latest signal processing technology and noise suppression algorithm to achieve stable measurement;
  • Good zero-point stability, small steady state fluctuation rate, fast dynamic response speed;
  • Sensor with wear-resistant lining, suitable for flow measurement of solid or non-uniform liquids.
Technical Specification
Nominal Diameter DN15?DN600
Electrode Material 316L, Hb, Hc, Ti, Tan, Pt
Lining Material PTFE, PFA, F46, PU polyurethane, Ceramic
Dielectric Conductivity ≥5μS/cm, (softening water ≥20μS/cm)
Accuracy Level ±0.5%R?1.0%R
Flow Range 0.3m/s?6m/s
Ambient Temperature A?≤80??B?≤120?
Nominal Pressure 0.6MPa?1.6MPa (based on the meter size)
Installation Form Compact/Remote
Housing Material Stainless steel, Carbon steel
Process Connection Flange-type
Main Application Mainly used for pulp, coal water slurry, mud (containing micro particles), cement slurry and other slurry measurement.
Others Same as flange-type

Contact Us

Do you have a question about products? Need quotation? Want feedback from us?

Email

steven@flommit.com

cindy@flommit.com

Phone

+31-685420393

Our Location

Flow Meter B.V.

Madrigaalhof 3 2807PL Gouda Netherlands

BTW-Number: NL864826850B01

EORI-Number: NL864826850

KvK Number: 88930440

Copyright © By FM 2020.